If people knew more about how cars worked, they would understand just how important it is take care of both the engine and the transmission. When a car is neglected, these components are going to experience a lot of wear and tear, and not getting them maintained, is going to result in the loss of either the engine or the transmission. A broken transmission is not as easily fixable as something like a car battery or a set of brakes; it is a very long process that takes a lot of work, time and effort.

When a vehicle owner seeks out transmission repair denver colorado, for a broken component, it has to be checked over thoroughly. A transmission service denver colorado, is actually divided into three parts beginning with the transmission being looked over. Sometimes a repair to this component is not all that serious. Sometimes all that the mechanic has to do is check the fluids and refill them, and this can cause the transmission to start running just fine. 

However, if changing out the fluids does not resolve the problem, the next step is to go over the computer system of the car. In a manual transmission, the drive has to press the clutch in order to shift the transmission. If the clutch has gone out, then a clutch replacement denver colorado must be considered takes place. However, in an automatic, the computer is in charge of the shifting. The mechanic will have to check the sensors, and if they are malfunctioning, those sensors will have to be replaced.

If everything the mechanic tries does not result in a fixed transmission, then it will have to be completely taken apart. Once it is in pieces, every single part will have to be cleaned. If necessary replaced, especially if the pieces are old. After the transmission is put back together, it will be tested to make sure that everything is working. Once the testing is done, it will be put back into the vehicle. Transmissions are not as simple as drivers think, which is why it is important that all maintenance be done on a vehicle when required. If there is a major issue, then a mechanic will use a three step process to begin the repair work. If doing things like changing the fluids, and checking all components does not work, then the mechanic will have no choice other than to do a complete transmission rebuild.